Pressure gauge isolators cylinder bench

The power unit is specially designed for various trucks to add different types of snowboards,Hydraulic Gear Pump, provide lifting and swinging functions for the snowboards, Hydraulic Accessories Electrical,and can also choose different rings and different valves.Miniature Hydraulic Valve.

1. For pumps with different flow rates, pressures and motor powers, please check the ordering guide.

2. The motor is based on the gap working system S2 = 2 ~ 4min (continuous working time), so it cannot run continuously.

3. Before installation, the cylinder, tubing, joints and Other hydraulic components must be cleaned and free of any impurities.

4. The viscosity of hydraulic oil should be 15-68cst, and it should be clean and free of impurities. It is recommended to use HM46 hydraulic oil.

5. After the system runs for the first time, immediately check whether there is enough oil in the oil tank.

6. The hydraulic oil should be changed for the first 100 hours after the system is used, and the hydraulic oil should be changed every 3,000 hours thereafter.

Contact us if you need more details on Auxiliary Power Unit Aircraft. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Power Unit Trucking、Hydraulic Power Unit Gas Powered. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Old Products