Petrol Transfer 380v Rotary Gear Oil Pump With Safety Valve
|Payment Type:||L/C,T/T,Paypal,Western Union|
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||2 Days|
|Place of Origin:||China|
|Supply Ability:||1000 pcs/month|
Model No.: KCB
Petrol Transfer 380v Rotary Gear Oil Pump With Safety valve
The usage and maintenance
1. Start up preparation:
(1) Take off the sundry from the machine before starting and clean up.
(2) Bearing in vivo perfusion clean hot oil as lubricant , open A, B two holes, by injection from A hole, until B hole has the oil spill, rotate coupling with the hand, there would be no gas from two holes, and restore the two holes to tighten bolts.
(3) Check each part of the pump, motor, pipes and Other junction, should not have loose phenomenon.
(4) Turn the coupling with the hand can light turning, and observe the pump with and without friction, shall be immediately ruled out.
(5) Before driving to pump transmission medium, in the process of filling, slowly turns the coupling with the hand, should avoid up into the air.
(6) Transferring hot oil, while driving to uniform preheating. Preheating is to use the heating medium is to be delivered through the pump body.
Preheat standard: the oil temperature is not higher than 40 ℃, temperature < - 50 ℃ / hour, preheating, loosen bolts should be solid pump 0.3 0.5 mother, after the preheating to tighten it.
(7) Preheating process, should observe the running situation, once found running unhealthy phenomenon, should immediately stop the pump to check.
The KCB crude oil gear pump is equipped with a protection valve as an overload protection. The full return pressure of the protection valve is 1.5 times the rated pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, please note that this protection valve can not be used for long-term work of the Pressure Reducing Valve. It can be installed separately on the pipeline when needed. Seen from the overhanging end of the spindle to the pump, it rotates clockwise. Flow rate: 1.1m3/h-600m3/h Pressure: 0.28MPa--2.5MP. KCB gear pump is mainly used for oil flow and oil discharge in oil fields, oil depots, ports, docks, ships, etc.
Molde Capacity(L/MIN) Pressure(Mpa) Diameter(mm) Motor power(KW) KCB18.3 18.3 1.45 20 1.5 KCB33.3 33.3 1.45 20 2.2 KCB55 55 0.33 25 1.5 KCB83.3 83.3 0.33 40 2.2 KCB135 135 0.33 50 2.2 KCB200 200 0.33 50 4 KCB300 300 0.36 70 5.5 KCB483.3 483.3 0.36 70 7.5 KCB633 633 0.28 100 11 KCB960 960 0.28 100 18.5 KCB1200 1200 0.6 150 37 KCB1600 1600 0.6 150 45 KCB1800 1800 0.6 200 55 KCB2500 2500 0.6 200 75 KCB2850 2850 0.6 250 90 KCB3800 3800 0.6 250 110 KCB5400 5400 0.6 250 160 KCB7600 7600 0.6 350 160 KCB9600 9600 0.6 350 185
KCB18.3-KCB83.3 model crude oil pump:
KCB135-KCB960 model crude oil pump:
KCB200-KCB9600 model crude oil pump:
Botou Honghai Pump Co., LTD. Is a professional manufacturer specializing in developing and manufacturing various high viscosity pump , heat insulation pump , screw pump , asphalt pump , gear pump , stainless steel pump , high temperature pump , rotor pump , hose pump , and centrifugal pump .
Products are widely used in the national petroleum, chemical, shipping, electricity and other fields.
Our company has a perfect production system and quality assurance system, won the trust of domestic and foreign customers.
Botou Honghai Pump Co.,Ltd
Botou Honghai Pump Co., Ltd.is the development, manufacture all kinds of gear pumps, heat pumps, three screw pump, centrifugal pump based professional manufacturers, set Branch, engineering, trade and services in one, well-equipped, the design level advanced production and testing means complete. My company has a strong research and development capabilities, gear pump product design using CAD and CAPP and international standards, the products are widely used in areas of national petroleum, chemicals, shipbuilding, electric power and so on. My company has a complete production system and quality assurance system, has won the trust of domestic and foreign customers.
A high viscosity heat pump series: NYP series of high viscosity pump, gear pump high viscosity within NCB, LCB type insulation gear pumps, RCB, LQB steel insulation asphalt gear pump, LC, LCW Roots pumps, hardened slag pumps, heavy oil, heavy oil tar dedicated pump, CB belt bridge gear pump.
Second, the centrifugal pump series: RY air-cooled heat pumps, oil pumps, heat pump, CYZ self-priming centrifugal pumps, AY single two centrifugal pumps.
Third, the gear pump series: KCB gear pump, 2CY gear pumps, high flow gear pumps, gear pumps, copper wheel gear pump, stainless steel gear pump, YCB series arc pumps, arc gear pump; marine gear pumps, marine gear pump , marine pump, oil pump hosts, 2CG, KCG series of high-temperature gear pump, CHY DC gear pump.
Fourth, the screw pump series: SNH three screw pump, SNF three screw pump, SNS Series screw; 3G three screw pump, 3GR three screw pump, 3GC three screw pump, 3GF three screw pump, 3GBW insulation three screw pump, 3GL three screw pump. 2W.W twin-screw pump, G-type single screw.
Fifth, vane pump: vane pump, YPB vane pump, double vane pumps, vane pumps, also known as petrol, diesel vane pumps, chemical vane pumps, this type of pump specialized transport gasoline, diesel, benzene, etc. Similarly medium for large chemical plants, tankers, gas stations, ships refueling.
Our company with advanced production equipment, strict design, exquisite processing technology so that it has developed high-end gear pump products and favorable conditions of mass production and a strong advantage, to meet the various needs of users of the gear pump. And several domestic design institutes to establish a long term business relationship! And can be designed according to different user requirements of various special gear pump products, to apply to the use of different working conditions. Such as: Stainless steel gear pumps, explosive type gear pumps, gear pumps and Other acid class! Welcome to the new and old customers, calls to negotiate! We sincerely look forward to long-term cooperation with you!
- Company Name: Botou Honghai Pump Co.,Ltd
- Representative: Zhang Liang
- Product/Service: Gear Pump , Centrifugal Pump , Rotor Pump , Oil Pump , Water Pump , Tank Truck Pump
- Capital (Million US $): 10000000
- Year Established: 2010
- Total Annual Sales Volume (Million US $): US$50 Million - US$100 Million
- Export Percentage: 41% - 50%
- Total Annual Purchase Volume (Million US $): US$5 Million - US$10 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: Fewer than 5 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: Nancang street, Botou City, Cangzhou city, Hebei province, China
- Contact Person: Ms. Anna Yang
- Tel: 86-317-8300869
Premium Related Products